optoway sps-6110wg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/7/1 v1.0 1 sps-6110wg / sps-6110bwg / SPS-6110AWG (rohs compliant) 16g fc / 1310 nm / 10 km digital diagnostic sfp+ lc single-mode transceiver *********************************************************************************************************************************************************************** features l up to 14.025 gbps bi-directional data links l complaint with sfp+ msa l compliance with fibre channel 1600-sm-lc-l l compliant with 8g and 4g fibre channel l sff-8472 digital diagnostic function l 1310 nm dfb ld transmitter l ac/ac coupling according to msa l 2 to 10,000 m at 14.025 gbps l single +3.3 v power supply l rohs 6/6 compliant l 0 to 70 o c operating: sps-6110wg l -5 to 85 o c operating: sps-6110bwg l -40 to 85 o c operating: SPS-6110AWG l class 1 laser international safety standard iec-60825 compliant applications l multi-rate 16x / 8x / 4x fibre channel l 10g fcoe l 10g ethernet description the sps-6110wg series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as 16x/8x/4x fibre channel. it is with the sfp+ 20-pin connector to allow hot plug capability. digital diagnostic functions are available via an i 2 c. this module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. the transmitter section uses a 1310 nm multiple quantum well dfb laser and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated ingaas detector preamplifier (idp) mounted in an optical header and post amplifier ic. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (gb/s) fc distance (km) wavelength (nm) package temp. ( o c) rohs compliant sps-6110wg 14.025 16g / 8g / 4g 10 1310 dfb sfp+ with dmi 0 to 70 yes sps-6110bwg 14.025 16g / 8g / 4g 10 1310 dfb sfp+ with dmi -5 to 85 yes SPS-6110AWG 14.025 16g / 8g / 4g 10 1310 dfb sfp+ with dmi -40 to 85 yes absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c 0 70 sps-6110wg -5 85 sps-6110bwg operating case temperature topr -40 85 o c SPS-6110AWG power supply voltage vcc -0.5 3.6 v recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v 0 70 o c / sps-6110wg -5 85 o c / sps-6110bwg operating case temperature topr -40 85 o c / SPS-6110AWG power supply current i cc (tx+rx) 220 300 ma data rate 4.25 14.025 gb/s
optoway sps-6110wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/7/1 v1.0 2 transmitter optical specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical modulation amplitude po, oma -2 +2 dbm average launch power po, avg -4 +2 dbm 1 extinction ratio er 3.5 output center wavelength l c 1295 1325 nm output spectrum width l 1 nm -20 db width side mode suppression ratio smsr 30 db transmitter and dispersion penalty tdp 4.4 db relative intensity noise rin -130 db/hz average launch power of off transmitter -30 dbm 1. output power is power coupled into a 9/125 m m single-mode fiber. receiver optical specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes -12 dbm 2, oma unstressed sensitivity at 14.025 gb/s sens -10.9 dbm 3, average power stress sensitivity at 14.025 gb/s sens --- -10.2 dbm 2, oma receiver overload p max 2 --- dbm los -- deasserted los d --- --- -12 dbm transition: low to high los -- asserted los a -22 --- --- dbm transition: high to low wavelength of operation l c 1260 1565 nm optical return loss orl -12 db 2. measured with worst er; ber < 10 -12 and prbs 2 31 -1. 3. represents sensitivity based on oma spec, as corrected to incoming extinction ratio of 3.5 db. for example, an oma of 0.063 mw (-12 dbm) is approximately equal to an average power of -10.9 dbm, average with an extinction ratio of 3.5 db. electrical characteristics parameter symbol min typ max units notes high-speed signal (cml) interface specification input data rate 4.25 14.025 gb/s tx clock tolerance 100 ppm 4 differential input impedance rin 100 differential data input amplitude 150 1200 mvpp internally ac coupled output data rate 4.25 14.025 gb/s rx clock tolerance 100 ppm 4 differential output impedance rout 100 differential data output amplitude 350 600 700 mvpp internally ac coupled low-speed signal (lvttl) interface specification input high voltage 2.0 vcc+0.3 v input low voltage gnd 0.8 v output high voltage 2.4 vcc v output low voltage gnd 0.5 v 4. clock tolerance for 14.025 gb/s, 8.5gb/s and 4.25 gb/s.
optoway sps-6110wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/7/1 v1.0 3 connection diagram pin signal name description pin signal name description 1 v ee t transmitter signal ground 11 v ee r receiver signal ground 2 tx_fault transmitter fault indication. logic 1 output = laser fault. logic 0 output = normal operation 12 rd- inverse receiver data out 3 tx_disable logic 1 input (or no connection) = laser off, logic 0 = laser on. 13 rd+ receiver data out 4 sda modulation definition 2 C two wires serial id interface 14 v ee r receiver signal ground 5 sdl modulation definition 1 C two wires serial id interface 15 v cc r receiver power C 3.3v 5% 6 mod-abs modulation definition 0 C ground in module 16 v cc t transmitter power C 3.3v 5% 7 rs0 rx rate select: this pin has an internal 30k pulldown to ground. a signal on this pin will not affect module performance. 17 v ee t transmitter signal ground 8 rx_los loss of signal out (oc). 18 td+ transmitter data in 9 rs1 tx rate select. this pin has an internal 30k pulldown to ground. a signal on this pin will not affect module performance. 19 td- inverse transmitter data in 10 v ee r receiver signal ground 20 v ee t transmitter signal ground module definition module definition pin 4 pin 5 pin 6 interpretation by host 4 sda scl mod-abs serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, sda and sdl appear as no connector (nc) and mod-abs is ttl low. when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway sps-6110wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/7/1 v1.0 4 recommended circuit schematic 0.1 f 22 f 0.1 f 22 f vee r post amp ld driver z=50 z=50 z=50 z=50 vee t 4 .7 h 4 .7 h td - td + vcc t vcc r rd - rd + 100 sfp+ module serdes 100 los rd - rd + td - td + 0.1 f protocol eeprom module detect scl sda loss of singal tx_disable tx_fault mod_abs scl sda 10 k 10 k 10 k 10 k tx_fault tx_disable (1,17,20) 3 2 18 19 16 15 12 13 8 (10,11,14) 6 5 4 10 k vcc 3.3v vcc 3.3v ic ic depending on serdes 0.1 f 30k 30k rs1 rs0 7 9 tx rate select rx rate select package diagram units in mm note: specifications subject to change without notice.
optoway sps-6110wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/7/1 v1.0 5 eeprom series id memory contents (address a0h) addr. hex ascii note addr. hex ascii note addr. hex ascii note addr. hex ascii note 0 03 sfp+ 32 20 64 00 96 00 1 04 33 20 65 1a uncooled tx, txdis, txfault, los enable 97 00 2 07 lc 34 20 66 00 up bit rate 98 00 3 20 10g base-lr 35 20 67 00 low bit rate 99 00 4 00 36 00 na 68 100 00 5 00 37 00 69 101 00 6 00 38 0e 70 102 00 7 10 long distance (l) 39 fa vendor ieee oui 71 103 00 8 10 longwave laser (ll) 40 53 s 72 104 00 9 01 single mode (sm) 41 50 p 73 105 00 10 f0 1600/1200/ 800/400 mbytes/sec 42 53 s 74 106 00 11 06 64b/66b 43 2d - 75 107 00 12 8c 14.025gbps 44 36 6 76 108 00 13 00 45 31 1 77 109 00 14 0a 10km 46 31 1 78 110 00 15 64 10km 47 30 0 79 111 00 16 00 48 57 w 80 112 00 17 00 49 47 g 81 113 00 18 00 50 20 82 114 00 19 00 51 20 83 serial number: each piece with different serial number 115 00 20 4f o 52 20 84 116 00 21 50 p 53 20 85 117 00 22 54 t 54 20 86 118 00 23 4f o 55 20 part number 87 119 00 24 57 w 56 30 0 88 120 00 25 41 a 57 30 0 89 121 00 26 59 y 58 30 0 90 122 00 27 20 59 31 1 revision, depended on version 91 date code 123 00 28 20 60 05 92 68 monitoring 124 00 29 20 61 1e 1310 nm 93 f0 soft control and monitoring 125 00 30 20 62 00 reserved 94 05 sff-8472v11.0 126 00 31 20 vendor name 63 checksum 0-62 95 checksum 64-94 127 00 vendor specific eeprom
optoway sps-6110wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/7/1 v1.0 6 eeprom series id memory contents (address a2h) addr. hex note addr. hex note addr. hex note addr. hex note 0 55 32 4d 64 00 for external cal. 96 real time temp. msb 1 00 temp. high alarm (85 o c) 33 f1 rx power high alarm (3dbm) 65 00 for external cal. 97 real time temp. lsb 2 fb 34 02 66 00 for external cal. 98 real time vcc msb 3 00 temp. low alarm(-5 o c) 35 01 rx power low alarm (-12.9dbm) 67 00 for external cal. 99 real time vcc lsb 4 50 36 3d 68 3f for external cal. 100 real time tx bias msb 5 00 temp. high warming(80 o c) 37 e9 rx power high warming (2dbm) 69 80 for external cal. 101 real time tx bias lsb 6 00 38 03 70 00 for external cal. 102 real time tx pwr msb 7 00 temp. low warming (0 o c) 39 2d rx power low warming(-10.9dbm) 71 00 for external cal. 103 real time tx pwr lsb 8 8c 40 00 reserved 72 00 for external cal. 104 real time rx pwr msb 9 a0 voltage high alarm (3.6v) 41 00 reserved 73 00 for external cal. 105 real time rx pwr lsb 10 75 42 00 reserved 74 00 for external cal. 106 reserved 11 30 voltage low alarm(3.0v) 43 00 reserved 75 00 for external cal. 107 reserved 12 88 44 00 reserved 76 01 for external cal. 108 reserved 13 b8 voltage high warming(3.5v) 45 00 reserved 77 00 for external cal. 109 reserved 14 79 46 00 reserved 78 00 for external cal. 110 tx dis, tx fault, rx los 15 18 voltage low warming (3.1v) 47 00 reserved 79 00 for external cal. 111 reserved 16 af 48 00 reserved 80 01 for external cal. 112 alarm flag 17 c8 tx bias high alarm(90ma) 49 00 reserved 81 00 for external cal. 113 alarm flag/reserved 18 03 50 00 reserved 82 00 for external cal. 114 reserved 19 e8 tx biaslow alarm(2ma) 51 00 reserved 83 00 for external cal. 115 reserved 20 9c 52 00 reserved 84 01 for external cal. 116 warming flag 21 40 tx bias high warming (80ma) 53 00 reserved 85 00 for external cal. 117 warming flag/reserved 22 07 54 00 reserved 86 00 for external cal. 118 reserved 23 d0 tx bias low warming (4ma) 55 00 reserved 87 00 for external cal. 119 reserved 24 4d 56 00 for external cal. 88 01 for external cal. 120 25 f1 tx power high alarm (3dbm)) 57 00 for external cal. 89 00 for external cal. 121 26 0c 58 00 for external cal. 90 00 for external cal. 122 27 5a tx power low alarm(-5dbm) 59 00 for external cal. 91 00 for external cal. 123 28 3d 60 00 for external cal. 92 00 for external cal. 124 29 e9 tx power high warming(2dbm) 61 00 for external cal. 93 00 for external cal. 125 30 0f 62 00 for external cal. 94 00 for external cal. 126 31 8d tx power low warming (-4dbm) 63 00 for external cal. 95 check sum 127 vendor specific note: address 128 C 247: customer r/w eeprom. address 248 C 255: vendor specific. note: specifications subject to change without notice.
optoway sps-6110wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2011/7/1 v1.0 7 revision history version subject release date 1.0 initial datasheet 2011/7/1
|
